Clutch cover and Flywheel unavailable to install. (Flywheel knock pin cannot be installed, Bolt hole unmatch)
- Distorted retracter leaf spring / Faulty with gap above diaphragm spring
- Faulty under diaphragm spring
- Clutch diaphragm fingers or levers are uneven
- Diaphragm fouled on clutch disc
- Worn clutch disc facing fibers and dirtlodged between diaphragm spring and clutch coverhousing.
- Excessive wear on diaphragm tips
- Oil or grease contamination on friction surface
- Discoloration on friction surface and/or clutch cover
- Warped clutch cover assembly by reuse
- Hold down bolts still in cover assembly
- Mirror finish on pressure plate friction surface
- Burst pressure plate casting
- Interference with the other part
- The position of clutch cover holes is not aligned with flywheel
- Abnormal sound with foot off clutch pedal (metal squeaking sound). Sound disappears with light pressure or full depression of the clutch pedal is applied.
- Clutch cover and Flywheel unavailable to install. (Flywheel knock pin cannot be installed, Bolt hole unmatch)
Cause
Clutch cover has been deformed by dropping.
Using a different clutch that does not fit the vehicle.
Flywheel has defomed by heat.
Solution
Replace clutch cover. (Dropped product, incorrect clutch cover)
Replace Flywheel.
If the flywheel has been deformed by heat it cannot be fixed by re-grinding. Recommended to replace the Flywheel.
Back to List